Padding of the saloon car with his hands

You may need to drag the interior of his car in the event that after a long time operation of the vehicle your salon lost its former freshness and cleanliness, and cleaning does not help. Primarily this will involve light shows. They are much quicker to lose their appeal, because in the car gets a lot of dirt and dust. Buy new chair is not very reasonable, and worth it is not cheap, but the drag elements of interior cabin with his hands, could well every motorist. Naturally for this we must make some effort and skill, but the end result will please any motorist. For the seat of your car you can find and buy, instead of the old and new cases. Choose them based on the color you need and the desired shape. Nor trim armrests and door trim can change ourselves. It's enough just to pick an appropriate color of fabric. For example, you have a black-and-blue saloon range, so you'd better use a bright blue fabric. It is best to start with constriction interior lining of doors. Once you've decided to start work, you first prepare the right tool. For this you need two screwdrivers. One with a bent 90 degrees to the end and another will serve to fill the tissue inside the door. You will also need glue. Pulls the door trim 1. Remove the door trim and clean the door from dirt and dust. 2. Attach to the door of the material and cut it along the contour. 3. Cut holes for handles. 4. Use a screwdriver to start to fill the fabric along a path. 5. Draw a line the exact shape of skin and straighten the fabric, leaving the allowances on all sides. 6. Apply at the door, near the edge of skin, a small amount of glue and using a flat screwdriver to start the refill tissue inside. When running, pull and flatten the fabric so that there was no wrinkling, and skin remained smooth. 7. Place a hole where it will be windows. By selling cloth in the hole. 8. Then carefully cut it into pieces so that the upper edges of the fold and glue them to the other side. Padding of front door is on the same principle. Once you have dragged the door, you can safely proceed to the waist of the armrest. This part of the interior, too, follow the general style. Since the armrest includes several parts, for his waist and design better use the tissue of the two, harmonizing with each other flowers. Pulls trim armrest 1. Remove the seat armrest and take it apart. Then we must prepare the pattern. For this we need to make armrest to the paper and cut around the perimeter of its contours. When you cut the circled part, you get the pattern. 2. Then cut the fabric items, taking into account allowances for podgibku. Try on items on the armrest. 3. Sew the seams at the bottom and start to pull the fabric on the armrest. 4. Tight stretch fabric, avoiding folds and gluing its perimeter. 5. The same procedure again for the top element armrest. 6. Collect the armrest and put in place.