Paint the car with his hands

Before you begin to paint the machine, it must be well washed, unnecessarily in the contaminated machine can not see all the trouble spots. Once you have inspected the car, you have to define what the painting will be made: the capital, partial or spot metering. With the full painting will need to pass the following stages: 1. Preparation for painting 2. padding 3. Filling 4. Grinding 5. Application of paint 6. Drying Car 7. When polishing spot dyeing machines must be closed, the place that you will not be painted. Paint on the car in several layers of paint, because the patched one layer does not provide a continuous film, has no protective and decorative properties. One detail of the car, or already assembled body necessarily requires preparation before painting. Preparation process depends on the material quality of finish and surface condition. Do not forget that the color of the car 90% of time spent on preparatory work, but only 10% for color. Before painting to cook: paint to metal pans with lids from 0.5 to 2 liters of mesh for filtering paints Rags, sticks for stirring paint Coarse and fine abrasive metal and rubber spatulas spray gun and compressor - a device for spraying paint. Before you begin painting carry out the following procedure: 1. Remove items interfering with paint (locks, moldings, gaskets), if not removed, then under them is a large accumulation of moisture, so they will be more prone to corrosion 2. Zashpatlevat, clean up and prime the body 3. Remove old paint and clean the corrosion 4. Sometimes you have to weld and straightening After the work performed can start painting cars. When painting a car must be applied for at least three layers of paint, the total thickness ranges from 70-120mkm.Takzhe when painting a car is necessary to protect the machine from pollination, can not cover the painted surface with paper, and to paint the area with straight lines to help the medical adhesive. Still can not cover painted surfaces with a special compound made from 20% dekstrita, 10% water, 40% chalk and 30% glycerol. This mixture is easily washed off with water, but we must follow that it will not hit the surface stained. The paint was stirred and diluted to the desired viscosity and filtration. When opening cans of paint for the car, be sure to remove the foil and mix well. Staining of the car is by spraying. The first layer has a viscosity of 26 s.Dalee wait 5 minutes and start to paint the second layer. The third and second layer of colored liquid paint to the 26s.