Flocking car

Flocking is the coating surface to produce a velvet effect. Subjected to such treatment can completely any material and its hardness will not matter. Today flocking prevalent in the furniture industry, interior decoration, but is particularly widespread flocking received a trim cars. The demand for this coating is due to its not the usual properties: 1. Flock resistant to light. Lightfastness it is not less than five years. 2. This is a fairly durable material, since after 10,000 friction wears a drop of the coating (about 23 mg, compared to 732mg I have felt). 3. Flocked surface significantly improves the adhesion with other subjects. At the time that the wash it is simple enough. For this purpose, any suitable cleaning, including chemical agents. The color of the surface remains unchanged. 4. Flocked surface prevents condensation and safe for health. 5. Just a huge plus is the low ability flock to inflammation. The temperature of the flammability of various types of this material ranges from 400 to 5500 ° C. 6. Flock good heat insulator. Flock 2 mm compete with polystyrene 10mm thick. 7. Distribution in the trim of cars flocking was due to sound-absorbing properties. The average value of absorption is about 13%. Besides all these advantages it is important to mention that the flock is resistant to weathering and chemical conditions. There are several types of flock, which allow more individual approach to the coating surface. Typically, the flocking of surfaces exposed to high mechanical loads are longer and thicker fibers and textiles for more delicate and short. If it is important to emphasize the shape and achieve a high quality surface coatings, such as in the decoration items, suitable polyamide flock. Such coverage is most often used in automotive, furniture and interiors. Services flocking automotive parts: ceiling from 4000 rub. Door skin (09-99) (1 pc.) 1000-1200 rubles. Door casing, depending on the model (1 pc.) Away. 1200 rub. Visors (per pair) 700 rub. Tunnel 1000-1300 rubles. Thresholds (1 pc.) 200 rub. Front door pockets WHA 2110-15 (2 pcs.) From 600 rubles. Front desk (2 pcs.) From 300 rubles. Rear and middle racks (1 pc.) From 400rub. The front panel (depending on the size and complexity) from 3000 rub. Price flocking other items considered of value 1m2-2000 rubles. When combining colors one piece 1m2 - 3000 rubles. Withdrawal of installation cost is not included. Cost base, on the possible adjustment in each case. The combination of colors increases the cost by 10% the time of manufacture for a day. Primary colors: - blue cornflower, maroon, black, yellow.