Tiviplen Insulation adhesive material on the basis of PES Material "Tiviplen" adhesive based on polyethylene (PES), intended as an insulation and sealing in various vehicles. Material "Tiviplen" is available in sheets and 1250h1500 1400h2000 mm. 4,8,15 mm thickness with an adhesive mounting layer and the different kinds of facial covering. Calculate the material for operation at ambient t ° -40 ° C to +70 ° C, has good insulating properties, waterproof, does not decompose. Strength of the material with the carrier surface is not less than 3,5 N / cm. Flammability of 100 mm / min. Photo insulating material "TIVIPLEN" Izoplast Vibration Reducing foil adhesive material. "Izoplast - Elastic Vibration Reducing material, which is a polymeric adhesive composition, duplicated with aluminum foil. "Izoplast is designed to reduce vibration transmitted from the engine and operating units of product design in mechanical engineering. Exploited the material at t ° the environment from -50 ° C to 160 ° C. "Izoplast" does not decompose and does not absorb moisture, has the properties of the sealant. A distinctive feature of the material is that the installation does not require heating and can be mounted on a surface with complex relief. Strength of the material "Izoplast" with the carrier surface - at least 6 N / cm. Material "Izoplast" is available in sheets measuring 500h1000 mm, 2 mm thick, 2.5 mm and 3 mm. The coefficient of mechanical losses - 0,12 conv / unit. Drag at 160 ° C for 2 hours - less than 2 mm.
No comments:
Post a Comment