Replacing the front struts on a car Toyota

Before replacing the front struts, always make sure that you put the car on the handbrake, so you should be extremely careful during the procedure of removing the spring, yet you need to tighten all bolts and nuts during the final stages, as an important is to make sure that no more than one bolt or nut that you are tied after the completion of the change counters do not forget to bleed the brakes on your vehicle. Do not forget that on how well you have done your work will depend on your future security. First we need to weaken the center-mount rack, loosen the nuts securing the wheel and pick up the car with the jack. Next we need to remove the wheel and disconnect the hose to the brake fluid, as well as we need to remove the sensor ABS, no matter what he suffered at our next actions. Now we can loosen the stabilizer, the lower two bolts at the front and three screws for the top-mount racks, and then we need to remove the rack with the spring. Well, now we have to just pull off the spring, loosen the screw of the central mounting rack, disassemble the spring and the bar and collect all the new parts. Now we need to do the same thing only in reverse. It is very important at the stage of assembly is exhibiting all the marks, which marks the top of the cup and spring, bolt, and bottom mount, in one line. Fasten (baits) to all this central bolt mounting racks and after all the tags again checked decompress the spring. Now we can establish our stand in place, so that the average bolt of the upper mounting rack is in its place. It remains to fix the remaining two screws fastening the top and go to the consolidation of the lower mounting rack, for this place baits on the bottom mounting rack. Next, fasten the stabilizer to its original location and install the sensor ABS, as well as fasten in place the brake hose. Now we can tighten the bolts attaching the lower rack, put in place the wheel and making money out of his nuts, tighten them. Now we can lower the car with a jack. Completes our procedure is pulling wheels and center mounting rack. All we have replaced the old to the new rack, now do not forget to pump the brakes if you do not want to break up:). Sales of new cars from the official dealer of VAZ. Any model and a complete set of your choice. You can also issue additional options to your car, such as: rubber floor mats, security system, anticorrosive treatment of the body. Cars are in a warehouse in Moscow.