Rastonirovanie car windows with his hands

Over time, Tinted car windows dim, loses its former brilliance, fade or it gets scratched. Thus, the car loses its appeal. In this situation, there is nothing for it but to replace the dubbing film. However, to toned glass machine, you need to get rid of the old toning. At the moment, car services, this service costs money, so here we tell you how you can rastonirovku own hands. This process requires a lot of attention and patience. And so, in order to implement rastonirovku yourself you will need: - Building dryer (dryers with a little power will not do) - a thin metal bench line or razor blades (old style) - for removing adhesive - high-quality detergent for windows. Process rastonirovki car windows. 1. Before you start rastonirovanie car windows, you should warm up the glass to room temperature. 2. The procedure for removal of dubbing the film. 3. Eliminating the adhesive layer from car windows. 4. Cleaning the glass by means of glasses. So, let's begin. To begin to remove the old tint from the glass you need to warm up to room temperature. This can be done by building a hair dryer. Take a hair dryer and uniformly heat the surface of the glass. Heating glass should be very careful not to get a strong overheating. Otherwise, the glass of your car can crack. Once you have warmed the glass, you can safely proceed to rastonirovaniyu. Find the edge of the film and gently pry the edge of the blade dubbing a film, and then slowly tear it off the glass. Once the film is removed, you need to get rid of the remaining glue on the glass. To do this, take the vehicle to clean the adhesive layer and spray it evenly across the surface of the glass. After spraying, the glass will foam, which should remain on the glass in the machine for 3-5 minutes. This tool contains ammonia, so if you can not buy it in specialty stores or you want to save money, you can to remove the adhesive layer to use an ordinary household ammonia. However, the use of ammonia is necessary accurately, he gets into the airways, so this procedure is best done in a respirator. Once you have finished cleaning glasses of glue, take a dry and clean rag and wipe the surface of glass. Then, look carefully to no adhesive residue left on the glass. If necessary, remove the remaining glue with the blade. In order to bring the process to the end rastonirovki car windows, wipe the glass with a clean cloth and a special glass cleaner. At this stage rastonirovanie finished, good luck! At rastonirovku glass of the car it will take approximately 3-4 hours. Disassembly of the doors and windows to carry out the dismantling is not needed.