Painting booth with their hands

Currently, most motorists often use the services of maintenance services in terms of painting a car (color change, the consequences of accidents, etc.). This process always takes place in a special spray booth, but not every beauty salon can afford such a luxury. Nevertheless, the gist of the article is that these settings can be done independently, that will not turn to expensive services maintenance services, as well as, if desired, and earn some money. Anyone who intends to carry out such a plan should, above all, to know that such cameras for painting cars come in two varieties: single-and twin-engine. For single-camera single-threaded character of the principle of air movement up and down, which contributes to subsidence "ink mist and, later, his weathered through the outlet. In the twin-chamber already has a more complex ventilation system, which provides two-way airflow: one motor catching air in the chamber and the second - it sucks from the chamber. Thus, before you make yourself like the camera should be very well versed in systems and installations supply and exhaust ventilation. Subsequently, after the subject to choose one or the other type of camera you need to know that the camera has 3 stages: - air circulation after the vehicle was driven into the camera - car painting - drying the vehicle after staining . In the first stage run in the air chamber is necessary to cleanse it from external elements (dust, fine particles of substances, etc.). In the second stage, the air is heated externally to at least 30 degrees Celsius and, without filtering, goes back out. And the third stage, already filtered air from the chamber reaches a temperature of approximately 2 times larger. In the makeshift chambers, the last stage, as a rule, do not use. As for directly, making this camera, it should act in this way: Rent a new or already experienced in the operation of the garage, the size of at least 6 meters. This will allow free to drive the car in such a camera and without any inconvenience to painting. Be sure to sheathe the walls of this chamber with metal or plastic sheets. Put in the camera are bright and strong fluorescent light. Will be even better if used for this purpose LED lamp. Set the rising floor, which allow the right time to include the cooler air beneath it, and leaves the paint chamber. Also, you need to remember this simple rule of economy - to set the infrared lamps, which, firstly, will significantly speed up the drying process of a vehicle without the use of air, and, secondly, increase the number of served vehicles (if the camera is created for business purposes). In the future, we can expand and lift (acquire) the room next to the existing camera and so on, but there a few years, this could turn into a high-quality and expensive auto show, which already will have their regular customers.