Polishing body with his hands

Polishing the car body is divided into two types: protective polishing and abrasive polishing. Protective Polishing On sale is a lot of polishing pastes, but despite this, they are divided into several types: in a Teflon-based and wax-based. The purpose of these polishes is to protect the body from the effects of the environment and giving the car a more fresh appearance. Such a polish should be applied to the car body and rub evenly over the entire area. The result should be formed of Teflon film or wax, which gives the body the above properties. But this layer of polish is gradually washed away with time. From this we can conclude the following: a wax filler can only clog the pores on the body and cover his greasy film, but after a few washes the car returned to its original appearance. Abrasive polishing can return the car a stylish and shiny look. It consists of several stages: 1. Removal using sandpaper oxide layer of paint, erased and scratches. 2. Polishing polished surface by using an abrasive polishing paste. 3. Evaluation of results and finalization sections. To operate the car in spaces where there is no draft, otherwise the body can get the dust, but it was under the cloth, it scratches the surface. It is also not recommended to polish the car under the sun, because it promotes too rapid drying polishes. If the car is completely polished, you should close the handles, lights and all the plastic parts. Next, you should not rush. Polishing a car should be carried out detailed hotel. The right wing is wiped with a degreaser, if there are scratches or risks, then the surface is polished until their complete disappearance. After obtaining a uniform matte surface grind the rest of the wing. If you do not abraded wing entirely, after polishing grinding area will look like a shiny spot. Doing is the same with the left wing. Then you can move on to the polished polished surfaces. On site car paste is applied by means of spray surface lightly moisturized, hydrated and polishing pad. On polishing machine sets minimum speed, and polished section of shade paste. After you can increase speed up to 1500 - at this stage and will continue the process of polishing. You should not pull or move erratically polishing machines, it first must be conducted smoothly horizontally, then vertically, or vice versa. If the paste will dry out, it can moisten with a little water. It is worth noting that excess water leads to the dispersal paste all over the car and plugging in the gap. After this it is necessary to wash the car, and it may take a lot of time. Polishing can be used not only as a method of restoring the original freshness of paint, but also aids in the removal of various errors (eg, stains, debris, shegreni) immediately after painting the car.