Polishing a car with his hands

Polishing the car needs to be done when the paint loses its luster and are formed minor scratches. To polish the car itself, must first understand the types of polishing. Distinguish between defensive and abrasive polishing. For the protection needed polishing polishing paste on a teflon or wax based. Wax is applied to the body of the car, pounded evenly, resulting in a Teflon film or wax. However, this layer eventually washed off. Abrasive polishing is carried out in several stages:-remove the risks, the oxide layer of paint and rubbing with sandpaper, for polishing, then sanded surface using abrasive grinding paste, show the machined surface and if necessary, to modify some uchastki.Polirovka abrasive method is carried out in a room without drafts, or on the back of the dust settles, which is the cause of new scratches. Polishing is not carried out in the sun, because it will quickly dry polish. Plastic parts of the car stick with masking tape. Polishing is carried out in stages, it is not recommended in a hurry. Work surface must first degreased, treated with a special tool. Scratches and risks need to grind to a complete disappearance and achieving a matte surface. When grinding to periodically wet the treated surface water. Motion carried to one side, and passed all the detail needed to carry out wide, as if perecherkivaya past direction. It is very important to remember that sanding - this is very time-consuming manual work, requiring patience and time. On average, in polishing a car needs a half day. We should also note that the grinding parts darker shades require additional processing, in which you want to use a smaller shkurku.Otshlifovav surface completely, you can start polishing. Polishing using polishing machines and polishing paste. Once put paste on the polished section of the car, sometimes it is slightly moistened with a spray in the same way as the polishing pad moistened. It is best to start polishing, putting sanders at the smallest momentum. This is done in order to feather the pasta. Further, in the work necessary to increase the speed to fifteen hundred. Is not recommended to move erratically or pull polishing machines. During the polishing body all the movements should be done very smoothly, first vertical, then horizontal (or vice versa). Dried up toothpaste is required to periodically moisten with water. It is also important during the polishing process to check the detail of overheating. If the item is very hot, take a break before her ostyvaniya.Esli you thought that the procedure for polishing the car is very complicated, or if you do not have the necessary tools and resources, it is best to contact the service centers to the professionals, so as not to spoil the look of your horse and do not create yourself unnecessary problems, both financial and manpower.