Adjusting headlights on Honda Accord

If you violated the direction of the optical axes of the headlights of a car, it usually leads to blindness drivers moving forward. And that could lead to disaster. Adjusting the headlights should be conducted at least once a year. Consider a way to set an example of Optics Car Honda Accord. At each lamp has two spring screws (internal and external) with which, and made adjustments. Setting lights can do yourself, without referring to specialists. The screws are on the back of the headlights and have a cross-slot. Therefore, the corresponding need a screwdriver. On some models, Honda Accord, in addition to traditional screws, there is the level meters lamps front optics, and this makes the setup process is not complicated. If you can not configure with the screw, then visited a car accident. We put a car on a level surface, close to the ideal, because it will depend on the quality setting, the front part of the wall or fence. Stick the tape in a vertical line on the wall so he walked down the centerline plane machines. Line can also cause chalk. Then, apply the chalk, or again applying the tape, make a vertical mark, which would pass through the projection of the headlights right in the middle. Next, paste the tape in a horizontal line so that it passes through the center of the projection lamps on the wall. All these actions are performed in the immediate vicinity of the wall that is necessary to adjust the car up close. Then driven away, or roll back the car about 7.5 meter. As mentioned above, the surface must be flat, half-filled tank and all the excess removed from the cabin. In a word, that nothing disturbed the alignment of the machine. Adjustment begins with setting the axis beam. We must try to achieve rotation of the propellers of this arrangement of spots of light, so they were at a distance of 50 mm below the horizontal line, and at the same time at a distance of 50 mm to the right of vertical. So adjusted headlights, including further. Zones of maximum saturation headlights should move closer to the intersection of horizontal and vertical lines, it was found slightly below the horizontal. Achieve perfect alignment of beams as a distant and dim light is difficult, so we need to find a compromise, given the particular operation of your vehicle in certain circumstances.