Part-painted car with his hands

In our time, many paint shops offer a painting of cars on a professional level. Is there a possibility to perform painting of the car with his hands? In theory, there really is such a possibility, but in practice the result of painting will depend on your skills and abilities. Laborious process of painting a car part should be divided into 3 phases. Originally worth wash the car and identify any defects body. In the preparatory phase includes a thorough preparation of the surface. This process requires a great deal of time and little time is spent on application of paints and varnishes. From good surface preparation directly depends on the strength of new coats of paint, varnish and polish. Need to remove old paint, and as carefully as possible. For this stage you can apply the tips to an electric drill or special chemical wash. Then you need to degrease the surface and apply primer to ensure a firm grip of all the layers of paint applied to cover. The second stage is a filler. This step is necessary to align the surface: removal of dents and unevenness, roughness. When applying putty most important thing to pay attention to details and the uniformity of the layer. For this purpose we use a special tool - a spatula. When choosing fillings, you should pay attention to varieties containing special additives that enhance the strength and heat resistance of the surface. To eliminate the through injury should select filler with chopped fiberglass. The third stage consists in applying the paint. If you make a decision on the partial painting of cars, we should bear in mind that it's hard to pick a shade of paint, which would be fully consistent with the old paint. Find the paint colors will be needed only by specialists at the workshop. In order to not appear on the body paint stains or patches, you can fork out and entrust the selection of tone professionals. The undisputed leader in enamels for painting a car - acrylic enamel. Should be applied several layers of enamel spray. Each of the layers requires dry. The first layer of enamel is applied with a minimum viscosity of 26 sec. In the interval between the first and second layer should make a break for about 5 minutes. More liquid formulation (viscosity up to 26 sec) is required for the second and third layer of enamel. When painting machines with their own hands should prevent dust on the surface, this achromatophilous sites, you can close the paper. Coating or polishing special protective structures may be further surface treatment. In general, the principle of painting the car with his hands available to every car owner. However, without certain skills quality of the work is questionable. Before you paint your own car, is to practice on some unnecessary body part. Upon receipt of a positive result after passing "the course the young painter" can safely proceed to a partial painting your own car.