Polishing the windshield with his hands

Glass Polishing effective way to cope with scratches, abrasions, the nadir of the janitors and clouding of the glass. It is fully returns lost luster and transparency of the glass. Polishing the glass has the following goals: eradication of Nadirov wipers on the windshield, acid stains of various kinds of scratches. The process of polishing the windshield includes several stages: preparation of the glass, causing him polishing mixture directly polishing, and final stage - the final wash the car. Preparation of glass. In order to start polishing the glass to protect the surface of the car adjacent to the windshield. Machine must be washed, dried. First car wash, wipe. Then, as a rule, take the film and its harbor surface of the car. Then cut a hole in the film, which is equal to the form of frontal car window. For reliability, a film from the edges need to tape pasted. Application of polishing paste. Polishing powder, or rather its part in the 80-150 gram, mix in water until creamy. Water is used by ordinary, from the tap. In the polishing machine, drill or fix frame. Go to the mandrel to make a felt circle. In Squirtwoman advance to get water. Now deal a little toothpaste on a small area, such as 30 cm by 30 cm, rubbing it on the glass surface and a felt circle, but it should be done while not including the no drill, no polishing machines. By the very process of polishing is now ready. Polishing. After drawing the masses include polishing machines. Translational motion to move it, but from the chosen area to go is not recommended. Polishers need to keep at a slight angle to the surface of the windshield. Windshield needed as often as possible sprinkled with water, which protects the glass from dry mass and thermal windows. During the polishing process to press hard on the car window is not necessary. Once you've finished polishing the specified area (30 cm by 30 cm), we must move to the next section. But part of the second section should be at first, so do not go untreated plots. Final stage. After finishing polish to thoroughly rinse the window and wipe it dry. Then check the glass surface. If it is shiny and has excellent transparency, the polishing process was a great success. But if you stayed at least one site with a matte surface, the polishing process will have to produce at least one more time. Once you have confirmed that polishing process was successful, you need to remove the film from the machine and remove the remaining dirt on the glass with ethyl alcohol or other means. Everything. Windshield of your car polished, it was brilliant and transparent. But not it be better to replace it immediately to the new? None. Polished glass has 2 big advantages over their full replacement windshield. Defects in glass are removed perfectly. If the damage is small, the cost of necessary repairs will be several times cheaper.