Sunday, July 17, 2011

Pre-sale preparation of the car with his hands

Preparing the car before selling is usually trusted by professionals from the dealers or the part of specialists who have extensive experience in this field and is always ready to work equipment and supplies. Another plus of this option - a short period in which to prepare your car. But all of the above, there is one, but a big disadvantage - quite a large sum of money required to carry out all necessary operations to prepare the car. But if you are a motorist with experience, you do not have a lot of free money and you're not limited in time - then you are quite capable to handle this task alone, minimally engaging with the work of professionals. Engine - the heart of any car. With him, and should begin to prepare the car for sale. Remove and clean the soot from the spark plug, reducing the gap to the desired limit. As a result of this simple procedure can achieve a more smooth, without jerks, engine operation. If the candle quite old, it is better to change them. Be sure to change the engine oil. Adjustment should be done the fuel and oil, and ensure that the motor was run from the half-turn. Add fuel additives, resulting in the car is expected to increase traction and decrease smoke exhaust. Remove the engine with oil stains and dirt. After all, the future owner will want to examine hood space. And if, because of the dirt he can not see the engine, it is unlikely to be interested in your car. Just do not be lazy and work with a cloth under the hood - the result will surprise even you. A little secret - that the engine starts quickly and operate smoothly, it is necessary to process the cover timer waterproof tool - good is good now, you can easily find at any automotive market. Remove and carefully Wash expansion tank, or rusty liquid in it will point to the presence of corrosion in the cooling system of your car. Now grab the belts. Tighten them - in order to eliminate squeaks. Eliminate gaps in the wiring - Check the insulation of the wires and contacts. It is time for the cabin. Armed with a vacuum cleaner and a rag, bring to the ideal of every inch of interior space. If possible, remove the seat - so it's easier to get to remote places. After this, take any means to polish the plastic coating interior and finish dashboard inserts, plastic doors and other similar places in the cabin. After all, the buyer, sitting behind the wheel and fell in love with your car's interior can simply not pay attention to the technical aspect of their future purchases. Tackle boot. Pull out all the tools and other glands, leaving only the necessary items installed by the manufacturer, while not forgetting to vacuum the trunk. If, on the body of your car are free from corrosion, dents or deep scratches that do not remove polish, you'll have to fork out for the painting of the car in whole or its individual parts. That is, if you want to sell your car, for which then would not be ashamed to spend a presale as if you're doing it for themselves.

No comments:

Post a Comment